ukrabraziv.com — Ukraine's abrasive tools portal
Home›Handbook›The abrasives industry of Ukraine: history and development
ReferenceUpdated: October 2026

The abrasives industry of Ukraine: history and development

Ukraine is one of the few European countries with a full abrasives production cycle, from smelting the grain to the finished tool. The foundations of the industry were laid in Soviet times, when electrothermal furnaces were built close to the cheap electricity of the Dnipro Hydroelectric Station and to bauxite feedstock.

Abrasive grain

The Zaporizhzhia Abrasive Plant has been operating since 1939 and remains the country's only manufacturer of abrasive grain. It smelts brown fused alumina, produces silicon carbide in resistance furnaces, and makes boron carbide and tools with vitrified and resinoid bonds. Most of its output is exported.

Superabrasives

The Institute for Superhard Materials (now named after V. N. Bakul) was founded in Kyiv in 1961. The first industrial production of synthetic diamonds in the USSR was set up here, and Kubonit, the institute's own brand of cubic boron nitride, was developed later. Diamond tools are produced in series by the Poltava plant, which has been operating since the 1960s.

Tools

AreaExamples of companiesProducts
Grain and full-cycle tool productionZaporizhzhia Abrasive PlantFused alumina, silicon carbide, wheels, sticks, segments
Reinforced wheelsNova Vodolaha Abrasive Plant (since 2013)Resinoid-bonded cut-off wheels and depressed-centre grinding wheels
Diamond and CBN toolsPoltava Diamond Tools, ISM (Kyiv)Wheels, dressing tools, pastes
Small manufacturersCompanies in Zaporizhzhia, Kharkiv and DniproMounted points, sticks, tumbling media, custom-made tools

What changed after 2014 and 2022

The industry lost the Russian market and some of its customers in the east of the country, but stepped up supplies to the European Union. To do so, plants certified their products to EN 12413, while manufacturers of reinforced wheels have them tested in European laboratories and mark them with the oSa mark of the Organisation for the Safety of Abrasives. Since 2019 most Soviet GOST standards have been withdrawn in Ukraine, and marking is increasingly done to ISO 525 and FEPA. The war has added risks: the largest plants are in regions close to the front line, and energy-intensive smelting depends on the state of the power system.

An up-to-date list of manufacturers and suppliers with descriptions of their products is in the Companies section.
This article is for reference only. Check operating parameters and specifications against the documentation of the tool and machine manufacturer.